Customization: | Available |
---|---|
Output Power: | 100W |
Fficiency: | >50% |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Main Features
A: Quartz crystal frequency stabilization
B: Dual TTL modulation input
C: One fixed pulse width, one adjustable pulse width
D: One analog input, linear adjustment of RF power
E: 24V power supply
F: Input current: 10A
G: RF synchronization technology, ensuring high laser stability
H: Overpower/underpower alarm, high standing wave protection
I: Built-in high-stability high-voltage power supply
J: Fast recovery speed after pulse shutdown
K: Suitable for various Q-switch crystals
L: Power short-circuit and over-temperature protection
Application Range
A: Acousto-optic modulator
Application Examples
A: High-frequency acousto-optic Q-switching for LD pumping
B: Fast optical switch
C: Replacing electro-optic Q-switch
D: High-speed photography
Power Parameters
Output frequency: 27MHz
Output power: 100W
Efficiency: >50%
Harmonics: ≤-20dBc, for output power >50W, ≤15dBc
Digital modulation input: 3.3V TTL level, customizable rising/falling edge or high/low level effective
(Note: This mode needs to be specified when ordering)
RF dynamic range: ≥50dB
RF output rise/fall time: ≤35ns
Digital modulation repetition frequency: Fixed pulse width trigger input: 1Hz-1MHz
Variable pulse width trigger input: 0-10MHz
Internal fixed delay range: 1-20μs
Working modes:
F = First pulse suppression
P = Pre-pulse suppression
A = Analog A
B = Analog B
C = Analog C
(Note: Working mode needs to be specified when ordering)
Analog power control input: 0-5V, input impedance 1.5k, selectable maximum power at 0V or 5V
(Note: Working mode needs to be specified when ordering)
RF output impedance: 50Ω, voltage standing wave ratio < 1.5:1
Operating current: ≤3A
Operating temperature: +10ºC to +55ºC, no condensation
(Note: Sufficient heat dissipation is required for this module)
Dimensions
Length: 200mm, Width: 105mm, Height: 95mm