100W 41.0MHz Air-Cooled Acousto-Optic Q-Switch Driver

• Customization: Available
• Output Power: 100W
• Efficiency: >50%
• Model NO.: 100F24S41D
• RF Dynamic Range: ≥50dB
• RF Output Rise/Fall Time: ≤35ns
• Internal Fixed Delay Range: 1-20μs
• Working Current: ≤3A
• Operating Temperature: +10°c to +55°c (No Condensation)
• Specification: Output frequency: 41MHz
• Origin: China

Product Description

Main Features:

A: Quartz crystal frequency stabilization
B: Dual TTL modulation inputs
C: One fixed pulse width and one adjustable pulse width
D: One analog input for linear adjustment of RF power
E: 24V power supply
F: Input current 10A
G: RF synchronization technology ensuring high laser stability
H: Over-power/under-power alarm, high standing wave protection
I: Built-in high-stability high-voltage power supply
J: Fast recovery time after shut-off
K: Compatible with various Q-switch crystals
L: Power supply short-circuit and over-temperature protection

Application Range: A: Acousto-optic modulators

Application Cases: A: High-frequency acousto-optic Q-switch for LD pumping
B: Fast optical switches
C: Replacement for electro-optic Q-switches
D: High-speed photography

Power Supply Parameters:

• Output frequency: 41MHz
• Output power: 100W
• Efficiency: >50%
• Harmonics: ≤-20dBc, ≤15dBc when output power is greater than 50W
• Digital modulation input: 3.3V TTL level, customizable rising/falling edge or high/low level effective (Note: This needs to be specified when ordering)
• RF dynamic range: ≥50dB
• RF output rise/fall time: ≤35ns
• Digital modulation repetition frequency:
  • Fixed pulse width trigger input: 1Hz-1MHz
  • Adjustable pulse width trigger input: 0-10MHz
• Internal fixed delay range: 1-20μs
• Working modes: F = First pulse suppression, P = Pre-pulse suppression, A = Analog A, B = Analog B, C = Analog C
  (Note: The working mode must be specified when ordering)
• Analog power control input: 0-5V, input impedance 1.5kΩ, with optional maximum power at 0V or 5V
  (Note: The working mode must be specified when ordering)
• RF output impedance: 50Ω, voltage standing wave ratio less than 1.5:1
• Working current: ≤3A
• Operating temperature: +10°C to +55°C (no condensation)
  (Note: The module requires adequate heat dissipation)

Power Supply Dimensions: Length: 200mm, Width: 105mm, Height: 95mm