Features Description
The TEC-600W-36V-3435 is a high-power-density TEC temperature controller with a maximum operating load of approximately 36V16A and a peak power of 576W. This controller allows direct parameter adjustment. Once configured and saved, the controller operates independently. Real-time temperature control is achieved through parameter adjustments and monitoring via the display panel.
Controller Specifications
- Input: AC220V
- Output Voltage: -36.0V to +36.0V
- Rated Operating Current: 13A
- Maximum Operating Current: 16A
- Indicator Current Output: Less than 50mA
- Temperature Sensor: NTC3435
- Control Temperature Range: -20ºC to +100ºC
- Communication Interface: RS485 with electrical isolation
Wiring Diagram
- 220V Cable: Connects to the AC220V mains.
- Output Connection PCB Terminal: Connects to the controlled TEC module.
- When the controller outputs heating voltage, the panel displays a positive proportion (1-100%), and the output polarity is red positive, black negative.
- For cooling voltage output, the panel displays a negative proportion (-1% to -100%), with the polarity being red negative, black positive.
- NTC Temperature Sensor: Connected via an XH2.54 terminal to monitor TEC temperature. Ensure the sensor is tightly attached to the cold side of the TEC for accurate control.
- RS485 Communication Interface: Connected via an XH2.54 terminal with three lines (485+, 485-, 485GND). The RS485 section includes electrical isolation for robust performance.
- GND: Signal ground.
- 485+: Positive RS485 output (5V high, 0V low).
- 485-: Negative RS485 output (5V high, 0V low).
Note: The communication protocol can be customized.
Audited Supplier 
){kind=link}