0.0625° C Resolution 3.3V Smart Semiconductor Tec Heating and Cooling Adaptive Driver

• Customization: Available
• Input: DC 12V~13V
• Output: -12V to +12V
• Model NO.: TEC-10A-3.3V
• Control Temperature Range: 0°c to 100°c
• Controller PCB Size: 64mm * 40mm
• Origin: China

Product Description

1. Feature Description
TEC-10A-3.3V is a high power density TEC temperature controller with a rated load of 6A and a peak current of up to 10A. This temperature controller can be connected to a dedicated debugger for parameter adjustment. Once the parameters are set and saved, the debugger can be removed, and the controller can still operate independently. It can communicate with a computer via a dedicated RS232 debugging cable to set parameters, monitor temperature, and perform temperature control.

2. Controller Specifications

1. Input: DC 12V~13V
2. Output: -12V to +12V
3. Rated Current: 6A
4. Control Temperature Range: 0°C to 100°C, with a resolution of 0.0625°C
5. Temperature Sensor: 03.3V, a temperature transmitter with a 0100°C range, linearly corresponding to the input 0-3.3V signal voltage
6. Controller PCB Size: 64mm * 40mm

3. TEC-10A Installation
For low power cooling applications, the working current of the TEC, once stabilized, is generally low, and the TEC-10A can dissipate heat through natural air cooling. In this case, the device can be installed with screw posts. For high-power cooling applications, where the working current of the TEC is large, heat dissipation can be achieved by mounting the board with heat conduction at the bottom.
If the user needs to change the temperature during operation, a user interface (debugger) needs to be added to the TEC temperature control system. The installation of the user interface is straightforward and can be done by creating a hole in the panel of the enclosure.