| Customization: | Available |
|---|---|
| Output Power: | 20W |
| Harmonics: | ≤ -20dbc |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main Features:
A: Quartz crystal frequency stabilization
B: Dual TTL modulation input
C: One fixed pulse width, one adjustable pulse width
D: One analog input for linear RF power adjustment
E: 15V power supply
F: Input current: 3A
G: RF synchronization technology to ensure high laser stability
H: Overpower/underpower alarm, high standing wave protection
I: Built-in high-stability high-voltage power supply
J: Fast recovery time
K: Suitable for various Q-switching crystals
L: Short-circuit and over-temperature protection
Applications:
A: Acousto-optic modulator
Application Examples:
A: High-frequency acousto-optic Q-switching for LD pumping
B: Fast optical switching
C: Replacing electro-optic Q-switching
D: High-speed photography
Power Supply Parameters:
Output frequency: 24MHz
Output power: 20W
Harmonics: ≤ -20dBc
Digital modulation input: 3.3V TTL level, customizable rise/fall edge active or high/low level active (Note: This mode needs to be specified at the time of ordering)
RF dynamic range: ≥ 50dB
RF output rise/fall time: ≤ 35ns
Digital modulation repetition rate: Fixed pulse-width trigger input: 1Hz-1MHz
Variable pulse-width trigger input: 0-10MHz
Internal fixed delay range: 1-20μs
Operating mode: F = First pulse suppression, P = Pre-pulse suppression, A = Analog A, B = Analog B, C = Analog C (Note: The operating mode must be specified at the time of ordering)
Analog power control input: 0-5V, input impedance: 1.5k (Optional: maximum power at 0V or 5V)
RF output impedance: 50Ω, voltage standing wave ratio < 1.5:1
Operating current: ≤ 3A
Operating temperature: +10ºC to +55ºC (No condensation)
Note: The module must be adequately cooled
Efficiency: >50%
Dimensions:
Length: 95mm
Width: 70mm
Height: 25mm
){kind=link}