12A 12V Intelligent Pid Semiconductor Tec Heating and Cooling Mode Adaptive Driver Source

• Customization: Available
• Input: DC12V~13V
• DC12V~13V: -12V to +12V
• Model NO.: TEC-10A-S-18b20
• Rated Current: 10A
• Temperature Sensor: Ds18b20
• Control Temperature Range: -55°c to 125°c
• Controller Dimensions: 80mm (L) * 40mm (W) * 24.5mm (H)
• Mounting Hole Size: M3
• Origin: China

Product Description

Feature Description: The TEC-10A-S is a higher power density TEC temperature controller, with a rated load of 10A and a peak current of up to 12A. This temperature controller can be connected to a dedicated debugger for parameter adjustment. Once the parameters are set and saved, the debugger can be removed, and the controller will continue to function independently. It can communicate with a computer via a dedicated RS232 debugging cable for parameter setting, temperature monitoring, and temperature control.

Controller Specifications:

1. Input: DC12V~13V
2. Output: -12V to +12V
3. Rated Current: 10A
4. Temperature Sensor: DS18b20 (available in both SMD and through-hole package types)
5. Control Temperature Range: -55°C to 125°C
6. Controller Dimensions: 80mm (L) * 40mm (W) * 24.5mm (H)
7. Mounting Hole Size: M3

Installation and Use of TEC-10A-S: The TEC-10A-S wiring consists of 6 connections, as shown in the image. When wiring, first connect the power line and DS18B20, and connect the GND terminal to the GND terminal of the DS18B20. Once the power is connected, finally connect the TEC. Ensure that the 12V power line interface is greater than 0.5mm*mm.

The DS18B20 is a commonly used temperature sensor, known for its small size, low hardware overhead, strong anti-interference ability, and high precision.

Important Note: When wiring, ensure the correct polarity: the negative terminal on the left and the positive terminal on the right when facing the flat side. Incorrect wiring will cause immediate heating and may result in damage. Incorrect wiring is also the cause of the sensor consistently displaying 85°C.